Professional Tool Reviews for Pros

In 2018, the Milwaukee Sawzall blade lineup expanded with the introduction of Milwaukee Torch with Carbide Teeth. Following the successful launch of the brand’s Ax with Carbide Teeth for wood cutting, the Torch now sports a new grill as well.

Of course, carbide is the buzzword around reciprocating saw blades these days. We’ve been taking advantage of carbide-tipped circular saw blades for much longer, but it’s taken longer to get a foothold with reciprocating saws.

So what’s the big advantage? Durability is the name of the game. It’s not unusual for a bi-metal blade to cut more quickly in wood and metal than carbide, but it’s very limited in life. Once you start moving into tougher material like the thick metals the Milwaukee Torch with Carbide Teeth is designed for, bi-metal can have trouble completing just one cut.

There is a slew of materials we could test the new Carbide Torch with. We chose to go with 5/8″ rebar (#5). With a relatively small diameter but made of solid metal, it forces the teeth to work the entire cut. In larger pipes, the responsibility shifts from the top to the outsides and back into the bottom of the cut.

We also assigned Milwaukee’s M18 Fuel Sawzall with One-Key to the job. With the ability to dial in the exact material you’re cutting and the blade you’re using, it dials in the soft start and cutting speed that’s optimal for the job.

One of Milwaukee’s claims is that the Carbide Torch can make up to 50 cuts in 1/2″ rebar. With the diameter a 1/8″ bigger, we made 42 cuts before the blade gave up its ability to cut effectively. That’s pretty solid.

When it comes to speed, the blade starts quickly before settling in. Our fastest cut was 11.3 seconds. By the time it settled into a rhythm, we were looking at an average of around 17 seconds.

For thickness, Milwaukee is slightly thinner than Lenox’ and slightly thicker than Diablo’s respective carbide blades. Dialing in the thickness helps stabilize the cut and reduce chatter, but there are clearly multiple theories on what’s exactly right.

Starting at cut #8, sparks started showing up and they were pretty frequent by cut #12. Still, the blade continued cutting well, despite an increase in vibration and chatter. The increase in chatter is something we expect as the blade starts to wear. At just 7 TPI, it’s a really low tooth count compared to bi-metal blades and even 1 less than the major carbide competitors. By the time we called it at cut #42, my arms were begging for a break.

Given our testing in rebar, the Milwaukee Torch with Carbide Teeth doesn’t cut like a first-generation carbide blade. It has a longer lifespan than we expect and a solid cutting speed. It’s not the best we’ve tested (sorry, no spoilers this time), but it is a solid all-rounder. With 7 TPI, you’ll notice more chatter as you get towards the end of its life. However, if you keep your blade speed down for thick metal, it will last a good long time.

On the clock, Kenny dives deep to discover the practical limits and comparative differences for all kinds of tools. Off the clock, his faith and love for his family are his top priorities, and you'll typically find him in the kitchen, on his bike (he's an Ironman), or taking folks out for a day of fishing on Tampa Bay.

Hilti Nuron Cordless Reciprocating Saw Replaces 12-Amp Corded Models The team over at Hilti pumped out some really great new tools on the Nuron battery system, but there are also a few familiar faces in the bunch. Among them is the Hilti Nuron SR 6-22 cordless reciprocating saw, which is the updated model from the […]

Milwaukee M18 Fuel Cordless Wet Dry Vacuum Introduces Versatility Like Never Before When Milwaukee invited us up to get a sneak peek of “jobsite cleanup” solutions, we were curious what they would have behind the curtain. Our wildest guesses were dead wrong, and the reality of Milwaukee M18 Fuel cordless wet dry vacuums is far […]

Diablo Demo Demon Spade Bits Make Easy Work Of Nail-Embedded Wood When you’re drilling, speed and power are two of the most critical factors. Diablo’s SpeedDemon spade bits have been a staple in many toolboxes, but they’re limited once you start hitting nails. When you’re working with a high risk of nail strikes, Diablo Demo […]

Milwaukee M18 Fuel Quik-Lok Attachment Lineup Gets Deeper For 2022 Designed to be full replacements for their standalone and manual counterparts, Milwaukee Quik-Lok attachments interchangeably latch onto a single powerhead. There are three accessories coming onto the roster in 2022—a brush cutter, a rubber broom, and a bristle brush. Milwaukee designed these to help landscaping […]

Hands down Diablo blades kick ass

As an Amazon Associate, we may earn income when you click on an Amazon link. Thanks for helping us do what we love.

See our Privacy Policy and Terms & Conditions.

Pro Tool Reviews is a successful online publication that has been providing tool reviews and industry news since 2008. In today’s world of Internet news and online content, we found that more and more professionals researched a large majority of their major power tool purchases online. That piqued our interest.

There’s one key thing to note about Pro Tool Reviews: We’re all about the professional tool user and tradesman!

Copyright ©2008-2022 Pro Tool Reviews, LLC. All rights reserved.

Professional Tool Reviews for Pros