I receive many questions on how to improve high-speed progressive die hits per service, otherwise known as tooling life. How can I get more parts per service? How can I run tooling longer? Faster?

The most immediate answer is to add a coating to your tools. But first, you have to make sure your stamping process is predictable and repeatable with perfect part quality, and that starts with a robust tool design.

If your tool design is lacking, investing in coatings will be throwing good money after bad. Here are the most common design shortcomings I have seen:

Once you achieve a consistent and predictable stamping process—your tooling service life is repeatable to +/-10%—you can take service life to the next level with tooling coatings. If your tooling service life repeatability is a higher number historically, you need to figure out what is going on. If you get 100,000 hits per service today and only 50,000 hits per service tomorrow, tool coatings will not help you.

At 1,000 SPM, we run simple flat blanks with minor forms and coins with great success using carbide tooling. With base materials of copper and thin-gauge stainless (0.005 to 0.012 in. thick), we achieve 10 to 20 million hits per service. We invested in the design and tool build, so these dies are very robust and can run for months on end. For us, going through the trouble of re-engineering the tooling to allow for the addition of coatings and then shipping it back and forth to the coater would bring us little benefit—we might gain another week of run time.

But for some extreme stamping applications, when we are forming and extruding material to its maximum capability, the stampings wouldn’t run at all without coatings.

Titanium aluminum nitride coating forms a thin oxide layer on the surface of the tooling, standing up to high temps and extreme pressure. It is very wear-resistant and works great on both steel and carbide.

Another option, vanadium carbide, is one of the hardest known metal carbides and offers excellent lubricity. Using VC on carbides of all grades has allowed us to exceed the engineering maximum allowable extrusion length and thickness. It also can be used on steel tooling.

We’ve also found VC to be the best choice when working with high-strength, low-alloy materials, which have extreme mechanical and corrosion resistance properties. The VC coating is diffused into the surface layer of the base material and offers a hardness of about 3,500 on the Vickers scale (compared to 1,800 for carbide).

Titanium nitride, with a 0.55 coefficient of friction, offers the consistent material flow, lubricity, and basic wear resistance that we need for coining applications. (At our first testing, however, we didn’t get the results we expected until our lubricant specialist pointed us in the right direction with an alternate lubricant, so always consult with your lubricant supplier.) It provides the wear properties of carbide but the toughness of hardened tool steel.

Remember, no two applications are exactly the same because of the tool build, materials, lubricants, and the presses they run in, so be sure to test several coating options under controlled conditions to find what works best.

See More by Thomas Vacca

Has a shop floor stamping or tool and die question stumped you? If so, send your questions to kateb@thefabricator.com to be answered by Thomas Vacca, director of engineering at Micro Co.

Read more from this issue

STAMPING Journal is the only industrial publication dedicated solely to serving the needs of the metal stamping market. Since 1989 the publication has been dedicated to covering the cutting-edge technologies, industry trends, best practices, and news that help stamping professionals run their businesses more efficiently.

Easily access valuable industry resources now with full access to the digital edition of The FABRICATOR.

Easily access valuable industry resources now with full access to the digital edition of The WELDER.

Easily access valuable industry resources now with full access to the digital edition of The Tube & Pipe Journal.

Enjoy full access to the digital edition of STAMPING Journal, which serves the metal stamping market with the latest technology advancements, best practices, and industry news.

Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.

© 2022 FMA Communications, Inc. All rights reserved.

Not yet registered? Sign up